

Totally Exhausted, Waxhaw NC
Custom Exhaust in Waxhaw, NC
Built on the lift.
We bend and fit full exhaust systems for cars, trucks, lifted rigs and motorcycles. You pick the sound, we build it, and you see the work before you pay.
Price before work startsCars, trucks and motorcycles
Options
Pick the system that fits
Cat-back
Replaces everything from the catalytic converter back. A popular way to change the sound and improve flow without touching emissions equipment.
Axle-back
Swaps the muffler and tips only. The simplest upgrade for a deeper note.
Dual exhaust and X-pipes
Two outlets for a fuller tone and a balanced sound. An X-pipe or H-pipe blends the two sides.
Headers
Replace restrictive manifolds to improve flow. Best planned together with the rest of the system.
Resonator and muffler choices
Add or remove a resonator to tune drone and volume, from mild to aggressive.
Tips and finishing
Polished, black or burnt tips, sized and angled to sit right on the bumper.
Truck and lifted setups
Single, dual, side-exit or turn-down routes, built around lift height, tire size and clearance.
Motorcycles
Slip-ons and full systems fitted and welded where needed.
What is included
What we do
- 01The sound you asked forDeep and loud, or quiet and clean. We talk it through before we cut any pipe.
- 02Bent and fitted hereWe bend the pipe in the shop, so it fits your vehicle instead of a catalog.
- 03Tips, hangers and bracketsWe finish the job right, so nothing rattles, drags or scorches the bumper.
- 04Cars, trucks and bikesDaily drivers, lifted trucks, classics and motorcycles all go on the same lift.
Good to know
Before you come in
- You get a price before any work starts.
- Bring the vehicle in, or call and describe it. A photo of the current setup helps.
- Custom builds take longer than a muffler swap. We'll tell you how long up front.
- Open Monday to Friday, 8am to 5pm. Closed weekends.
Any work involving catalytic converters, emissions equipment or sensors must stay legal for road use. We will tell you what can and cannot be changed on your vehicle.
How a build goes
From idea to finished system
Tell us the vehicle and the sound you want. A photo of the current setup or a video of a sound you like helps.
We look at the car on the lift and plan the route, pipe size and parts.
You get a price and a timeline before we cut any pipe.
We bend, weld and fit the system, and finish hangers and tips.
We check for leaks, clearance and rattles, then test it with you.
Sound guide
Choosing your sound
Sound depends on the engine and the vehicle. We will talk it through before we build.
| You want | Typical approach |
|---|---|
| Quiet and clean | Quality muffler plus resonator |
| Deep but daily-drivable | Cat-back with a moderate muffler |
| Loud and aggressive | Straight-through muffler, minimal or no resonator |
| No highway drone | Resonator and tuned pipe lengths |
Before and after
What a build changes
Before: stock and restrictive
A factory system is built for quiet and cost, with crush bends and a muffler chosen for the average buyer.
After: the sound you chose
Pipe bent to fit, a muffler and resonator picked for your tone, and tips that sit right on the bumper.
Before: rust, rattles and drone
An aging system with patched joints, loose hangers and a hum on the highway.
After: tight, and quiet where it should be
New hangers, clean welds, and a note that is there when you want it and gone when you cruise.
Want to see the old system next to the new one? Just ask.
From the shop
Real work, real shop









Common questions
Straight answers
How much does a custom exhaust cost?
It depends on the vehicle, the pipe size and material, and how much of the system is new. We'll look at it and give you a price before we cut anything.
Can you make it quieter instead of louder?
Yes. A lot of custom work is about getting rid of a drone or a rattle. Tell us the sound you want, and we'll build it.
Do you work on lifted trucks and motorcycles?
Yes. We work on lifted and modified trucks, classics and motorcycles all the time, and we route each system to fit.
What is the difference between cat-back and axle-back?
Cat-back replaces the pipe from the catalytic converter to the rear. Axle-back replaces only the muffler section behind the rear axle.
Will a custom exhaust drone on the highway?
It can, depending on the design. A resonator and the right pipe lengths reduce drone. Tell us how you drive and we plan for it.
Does a custom exhaust change performance?
A well-designed system can improve flow, and the sound will change. The gains vary by engine, and we will not promise numbers we cannot back up.
How long does a custom exhaust take?
A muffler swap can be same day. A full custom build takes longer. We give you the timing up front.
Do you do headers, X-pipes and tips?
Yes. Headers, X-pipes and H-pipes, resonators, mufflers and tips are all part of what we build and fit.

Tell us how you want it to sound.
Totally Exhausted does this work at 4417-A Helms Road in Waxhaw. It's one of three RPM Auto Group shops under one roof.
Where we work
Drivers from around here
Most of our customers are local, but drivers come from across North Carolina, South Carolina, Virginia and West Virginia for custom exhaust work. If you are driving in from out of town, call ahead and we will plan your build date.
Visit
Find Totally Exhausted in Waxhaw
Monday to Friday
8am to 5pm
Closed Saturday and Sunday
Most of our customers are from Waxhaw, Weddington, Marvin, Wesley Chapel, Indian Trail, Monroe, Mineral Springs, Matthews and south Charlotte, plus Fort Mill across the state line.